In this tutorial I will show you how to install 3CX for Debian using the beroNet Hypervisor. Towards the end of the tutorial, I will present how to set a static IP address to your Debian system. The tutorial will end with a pro tip on how to install 3CX for Debian in under five minutes.
Details
3CX recently announced the beta release of 3CX for Linux. During this video, we built a Debian 8 virtual machine and then follow the 3CX manual on how to install 3CX for Linux. How to Install 3CX for Linux in the beroNet Hypervisor: Install Debian: After logging into the beroNet Hypervisor, navigate to “Manage ISO’s”…
Details
The web interface of 3CX 15 is a bit different than version 14 but the configuration of a beroNet gateway with the IP-PBX is very similar. Find out the IP of your Gateway First things first: you need to find out the IP address of your gateway that you plugged to your LAN. To do…
Details
In this tutorial we will cover how to build a complete VoIP system using the beroNet Telephony Appliance 2.0, a m0n0wall firewall, and the IP-PBX system mobydick. We will cover how to install and configure these systems on the device, and then how to configure the IP-PBX system mobydick with a beroNet Gateway.
Details
In this video you will learn how to build a complete VoIP system using the beroNet Telephony Appliance 2.0 and the IP-PBX system 3CX.
Details
With the beroNet Appliance 2.0, VoIP integrators can install a complete cloud managed communication solution on a single server. The Appliance comes with the beroNet Hypervisor, enabling integrators to virtualise different systems on a single server. For example, with the beroNet Hypervisor an integrator can install a router (pfSense, m0n0wall, mikrotik) and an IPBX (3CX, Asterisk, Mobydick, etc) in…
Details
Connecting a beroNet VoIP Gateway to a 3CX Cloud installation is not difficult. In fact – with a VPN it’s essentially the same process you would use with a local installation. Eddie Vincent from beroNet distributor the Electronic Frontier guides us through a step by step tutorial on how to configure a beroNet VoIP Gateway with a 3CX Cloud Installation.
Details
Introduction The beroNet Appliance 2.0 is a telecommunication platform with an Intel Celeron Quad Core processor running a pre-installed beroNet Hypervisor. beroNet customers have the possibility to use the hypervisor to virtualize different operating systems enabling the single system to function as a complete communications hub. The Appliance can also function as a hybrid device…
Details
The beroNet dialplan defines how calls are to be routed through a beroNet Gateway. When first approaching the beroNet diaplan it helps to understand that: It is based on regular expressions (‘Howto RegEx’.) It works from top to bottom: if you have a rule that directs all calls to a specific line above a rule that directs…
Details
Even though Internet access is a lot more reliable than it used to be, it still has a few issues that may cause major problems in the VoIP world. Some companies use a PSTN line as a backup of the main SIP trunk to avoid these potential issues. beroNet gateways are a good way to create such a…
Details