Create a beroNet Appliance BootStick under Windows
=====================================================


1.) Download the tuxboot-0.5.exe  and the newest BNTA-*.zip file. 
2.) Start the tuxboot exe
3.) choose the USB Stick to flash  (note the Bootsick Requirements below)
4.) Choose preloaded ISO and choose the downloaded BNTA-*.zip file
5.) Wait till the files where written, then you're ready

WARNING:
========

Don't use with new BNTA-18 Mainboard


BOOTSTICK REQUIREMENTS:
=======================

The Bootstick must:

* be a USB2.0 Bootstick
* have a size of at least 8 GB
* the Filesystem must be FAT32


CHANGELOG:
==========

2016-02-16: V11
 * renamed EFI folder to EFI2, so that the legacy "Generic USB Flash" will be booted and not the UEFI 

2016-04-15: V12
 * removed EFI folder
 * removed ehci usb drivers which failed during boot and resulted in a "slow" boot-up (about 1 Min faster now)
 * added netconfig-server, so that bfdetect can now detect the USB stick too
 * root PW is now "beronet" !!! and sshd is enabled now

2018-09-18: V13
 * added recover HV option, which preserves the VMs and only installs the Hypervisor on the Boot Partition