how to install 3cx on debian using the beroNet Telephony Appliance

How to install 3CX for Linux in the beroNet Hypervisor

3CX recently announced the beta release of 3CX for Linux. During this video, we built a Debian 8 virtual machine and then follow the 3CX manual on how to install 3CX for Linux. How to Install 3CX for Linux in the beroNet Hypervisor: Install Debian: After logging into the beroNet Hypervisor, navigate to “Manage ISO’s”…

Details
3cxforlinux
Configure a VoIP Gateway with 3CX
VoIP Hardware: beroNet Appliance and mobydick
VoIP Hardware: How to build a complete VoIP System

How to register your beroNet Appliance 2.0 in the Cloud

With the beroNet Appliance 2.0, VoIP integrators can install a complete cloud managed communication solution on a single server. The Appliance comes with the beroNet Hypervisor, enabling integrators to virtualise different systems on a single server. For example, with the beroNet Hypervisor an integrator can install a router (pfSense, m0n0wall, mikrotik) and an IPBX (3CX, Asterisk, Mobydick, etc) in…

Details
Manage VoIP in Cloud

Connect a beroNet VoIP Gateway with 3CX in the Cloud

Connecting a beroNet VoIP Gateway to a 3CX Cloud installation is not difficult. In fact – with a VPN it’s essentially the same process you would use with a local installation. Eddie Vincent from beroNet distributor the Electronic Frontier guides us through a step by step tutorial on how to configure a beroNet VoIP Gateway with a 3CX Cloud Installation.

Details

How to configure the new beroNet Appliance 2.0

Introduction The beroNet Appliance 2.0 is a telecommunication platform with an Intel Celeron Quad Core processor running a pre-installed beroNet Hypervisor. beroNet customers have the possibility to use the hypervisor to virtualize different operating systems enabling the single system to function as a complete communications hub. The Appliance can also function as a hybrid device…

Details

Understanding the beroNet Dialplan

The beroNet dialplan defines how calls are to be routed through a beroNet Gateway. When first approaching the beroNet diaplan it helps to understand that: It is based on regular expressions (‘Howto RegEx’.) It works from top to bottom: if you have a rule that directs all calls to a specific line above a rule that directs…

Details

How to create a SIP to PSTN failover in a beroNet gateway

Even though Internet access is a lot more reliable than it used to be, it still has a few issues that may cause major problems in the VoIP world. Some companies use a PSTN line as a backup of the main SIP trunk to avoid these potential issues. beroNet gateways are a good way to create such a…

Details